{"title":"Surgical Instruments","description":"\u003cp\u003eGeneral \u0026amp; Specialty Surgical Instruments\u003c\/p\u003e","products":[{"product_id":"12v-50w-leica-bulb","title":"12V 50W Leica Bulb","description":"\u003cp\u003eThe Leica Microscope Bulb 12 V 50 W is a 12 V, 50 W replacement halogen bulb with a two-pin (bi-pin) base. It is intended for biomedical engineers, clinic maintenance staff and equipment distributors who service Leica microscopes and other 12 V instrument illuminators, and is fitted wherever the original lamp has reached the end of its working life.\u003c\/p\u003e\u003cp\u003eBefore fitting, switch the equipment off, disconnect it from the mains and allow the old bulb to cool completely. The new bulb is pushed firmly into the holder without touching the quartz envelope with bare fingers, since skin oils shorten lamp life. Always match the voltage, wattage and base of the original lamp.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRated 12 V, 50 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eSuitable for Leica microscopes and 12 V illuminators\u003c\/li\u003e\n\u003cli\u003eTwo-pin base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003ePractical stock spare for planned maintenance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Leica","offers":[{"title":"Default Title","offer_id":51189799878823,"sku":"EHM-0135","price":25.02,"currency_code":"OMR","in_stock":false}]},{"product_id":"a-thorn-bulb-with-a-copper-base-12-volt-50-watt-philips","title":"A Thorn Bulb With A Copper Base 12 Volt 50 Watt Philips","description":"\u003cp\u003eThe Philips Two-Pin Halogen Bulb 12 V 50 W, Copper Base is a low-voltage halogen lamp rated 12 V and 50 W, with a two-pin base with copper contacts. It is supplied as a like-for-like replacement for examination lamps, dental unit lights and bench-top microscopes, and is intended for biomedical technicians and facility managers who keep examination, theatre and laboratory lighting in service.\u003c\/p\u003e\u003cp\u003eInstallation follows the equipment manufacturer's lamp-change procedure: isolate the power, wait for the housing to cool, withdraw the spent bulb and seat the new one fully in its holder. Keep the envelope free of fingerprints and check any alignment or focus adjustment the lamp housing provides, so that the beam is centred and even.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRated 12 V, 50 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eTwo-pin copper-contact base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003eSuitable for examination lamps, dental lights and microscopes\u003c\/li\u003e\n\u003cli\u003eRestores full brightness and colour rendering\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Philips","offers":[{"title":"Default Title","offer_id":51189806891175,"sku":"EHM-0148","price":10.21,"currency_code":"OMR","in_stock":false}]},{"product_id":"bistos-head-light","title":"Bistos Head Light","description":"\u003cp\u003eThe Bistos Head Light is a head-worn medical examination light that gives clinicians a bright, focused beam aligned with their line of sight while keeping both hands free. It is used in ENT, dental, dermatology and minor surgery settings, as well as in general examination rooms and emergency departments.\u003c\/p\u003e\u003cp\u003eThe headband is adjusted to fit and the lamp module is angled so the spot falls exactly where the clinician is looking, illuminating cavities and wound sites that overhead lights leave in shadow. Hands-free illumination improves visualisation during procedures and examinations without an assistant having to hold a torch. Power and brightness settings are controlled on the unit.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHands-free focused illumination for examinations\u003c\/li\u003e\n\u003cli\u003eAdjustable headband and lamp angle\u003c\/li\u003e\n\u003cli\u003eSuited to ENT, dental, dermatology and minor surgery\u003c\/li\u003e\n\u003cli\u003eLights cavities that overhead lamps leave in shadow\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51189825831079,"sku":"EHM-0244","price":65.12,"currency_code":"OMR","in_stock":false}]},{"product_id":"buck-s-nerve-hammer","title":"Buck’s Nerve Hammer.","description":"\u003cp\u003eThe Buck reflex hammer is a neurological examination instrument for eliciting deep tendon reflexes at the knee, ankle, elbow and wrist. It is intended for physicians, neurologists, physiotherapists, nurses and medical students in hospitals, clinics and teaching settings.\u003c\/p\u003e\u003cp\u003eThe clinician holds the handle loosely and taps the tendon with a swinging motion, using the larger head for the knee and the smaller head for finer sites. The Buck pattern typically carries a detachable brush and pointed tip within the handle for testing cutaneous sensation and plantar response, giving a compact neurological kit in one instrument. The metal and rubber parts wipe clean between patients.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual-sized heads for different reflex sites\u003c\/li\u003e\n\u003cli\u003eBrush and pointed tip for sensory testing\u003c\/li\u003e\n\u003cli\u003eCompact instrument for the coat pocket\u003c\/li\u003e\n\u003cli\u003eSuited to clinical and teaching use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51189833105575,"sku":"EHM-0263","price":1.54,"currency_code":"OMR","in_stock":false}]},{"product_id":"bulb-24-volt-50-watt-base-and-a-japanese-ceramic-fez","title":"Bulb 24 Volt 50 Watt Base And A Japanese Ceramic Fez","description":"\u003cp\u003eThis 24 V, 50 W halogen bulb is supplied together with a ceramic lamp holder, giving maintenance staff both parts needed when the socket in an examination lamp or minor-surgery light has deteriorated along with the bulb. It is intended for biomedical engineers and clinic technicians servicing 24 V lighting in hospitals, clinics and dental surgeries.\u003c\/p\u003e\u003cp\u003eWith the lamp isolated and cool, the worn holder is disconnected and replaced with the ceramic holder, then the new bulb is pressed into its contacts without touching the quartz envelope. The heat-resistant ceramic body withstands the temperature of the lamp head, and a fresh holder gives firm contact that prevents flicker and extends bulb life.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e24 V, 50 W halogen bulb with matching ceramic holder\u003c\/li\u003e\n\u003cli\u003eHeat-resistant ceramic socket for lamp-head service\u003c\/li\u003e\n\u003cli\u003eFirm contact prevents flicker and premature failure\u003c\/li\u003e\n\u003cli\u003eComplete spare for examination and minor-surgery lights\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51189833138343,"sku":"EHM-0264","price":15.77,"currency_code":"OMR","in_stock":false}]},{"product_id":"bulb-fork-12-volt-30-watt-osram-germany","title":"Bulb Fork 12 Volt 30 Watt Osram Germany","description":"\u003cp\u003eA 12 V, 30 W halogen bulb with a two-pin (bi-pin) base, supplied as a replacement lamp for slit lamps, microscopes and bench-top instrument illuminators. It is intended for hospital engineering departments, clinic maintenance staff and equipment distributors who need a direct spare that restores the instrument's original light output.\u003c\/p\u003e\u003cp\u003eTo replace, isolate the unit, let the lamp housing cool and remove the spent bulb. Seat the new bulb fully so that both contacts engage, handling it only by its base or with clean gloves. Using the specified 12 V, 30 W rating protects the transformer and gives the even, bright field the instrument was designed around.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuitable for slit lamps, microscopes and instrument illuminators\u003c\/li\u003e\n\u003cli\u003eRated 12 V, 30 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eTwo-pin base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003eFit with clean gloves to protect the envelope\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51189833171111,"sku":"EHM-0265","price":6.17,"currency_code":"OMR","in_stock":false}]},{"product_id":"bulb-fork-24-volt-150-watts","title":"Bulb Fork 24 Volt 150 Watts","description":"\u003cp\u003eThe Two-Pin Halogen Bulb 24 V 150 W is a replacement lamp for operating-theatre lights, surgical microscopes and projection optics, rated 24 V and 150 W and fitted with a two-pin (bi-pin) base. It is used by theatre technicians and biomedical engineers in hospitals and diagnostic centres whenever the installed bulb dims, flickers or fails.\u003c\/p\u003e\u003cp\u003eFitting takes a few minutes: isolate the equipment, allow it to cool, release the old bulb and press the replacement home until it sits square in its holder. Avoid touching the glass, and wipe it with alcohol if handled. Keeping a spare of the correct rating on site avoids interrupted clinics and theatre lists.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo-pin base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003eRated 24 V, 150 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eSuitable for theatre lights and surgical microscopes\u003c\/li\u003e\n\u003cli\u003eCompact quartz-halogen capsule for tight lamp heads\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51189833203879,"sku":"EHM-0266","price":1.89,"currency_code":"OMR","in_stock":false}]},{"product_id":"bulb-fork-base-22-volt-220-watt-us","title":"Bulb Fork Base 22 Volt 220 Watt US","description":"\u003cp\u003eThe Two-Pin Halogen Bulb 22 V 220 W is a 22 V, 220 W replacement halogen bulb with a two-pin (bi-pin) base. It is intended for biomedical engineers, clinic maintenance staff and equipment distributors who service high-output operating-theatre lights, and is fitted wherever the original lamp has reached the end of its working life.\u003c\/p\u003e\u003cp\u003eThe bulb is fitted by pressing its contacts squarely into the lamp holder once the equipment is isolated and cool. Handle it by the base or with a clean cloth, as fingerprints on the quartz glass cause hot spots and early failure. Replacing with the correct 22 V, 220 W rating preserves the lamp's intended brightness and colour rendering.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRated 22 V, 220 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eSuitable for high-output operating-theatre lights\u003c\/li\u003e\n\u003cli\u003eTwo-pin base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003ePractical stock spare for planned maintenance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51189833269415,"sku":"EHM-0267","price":10.11,"currency_code":"OMR","in_stock":false}]},{"product_id":"bulb-thorn-12-volt-50-watts","title":"Bulb Thorn 12 Volt 50 Watts","description":"\u003cp\u003eThe Two-Pin Halogen Bulb 12 V 50 W is a low-voltage halogen lamp rated 12 V and 50 W, with a two-pin (bi-pin) base. It is supplied as a like-for-like replacement for examination lamps, dental unit lights, microscopes and fibre-optic light sources, and is intended for biomedical technicians and facility managers who keep examination, theatre and laboratory lighting in service.\u003c\/p\u003e\u003cp\u003eTo replace, isolate the unit, let the lamp housing cool and remove the spent bulb. Seat the new bulb fully so that both contacts engage, handling it only by its base or with clean gloves. Using the specified 12 V, 50 W rating protects the transformer and gives the even, bright field the instrument was designed around.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRated 12 V, 50 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eTwo-pin base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003eSuitable for examination lamps, dental lights and microscopes\u003c\/li\u003e\n\u003cli\u003eRestores full brightness and colour rendering\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51189833334951,"sku":"EHM-0269","price":1.89,"currency_code":"OMR","in_stock":false}]},{"product_id":"bulb-thorn-24-volt-250-watts","title":"Bulb Thorn 24 Volt 250 Watts","description":"\u003cp\u003eA 24 V, 250 W halogen bulb with a two-pin (bi-pin) base, supplied as a replacement lamp for operating-theatre lights, surgical microscopes and high-output projection optics. It is intended for hospital engineering departments, clinic maintenance staff and equipment distributors who need a direct spare that restores the instrument's original light output.\u003c\/p\u003e\u003cp\u003eFitting takes a few minutes: isolate the equipment, allow it to cool, release the old bulb and press the replacement home until it sits square in its holder. Avoid touching the glass, and wipe it with alcohol if handled. Keeping a spare of the correct rating on site avoids interrupted clinics and theatre lists.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuitable for theatre lights and surgical microscopes\u003c\/li\u003e\n\u003cli\u003eRated 24 V, 250 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eTwo-pin base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003eFit with clean gloves to protect the envelope\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51189833367719,"sku":"EHM-0270","price":1.89,"currency_code":"OMR","in_stock":false}]},{"product_id":"bulb-thorn-6-volt-20-watts","title":"Bulb Thorn 6 Volt 20 Watts","description":"\u003cp\u003eThe Two-Pin Halogen Bulb 6 V 20 W is a 6 V, 20 W replacement halogen bulb with a two-pin (bi-pin) base. It is intended for biomedical engineers, clinic maintenance staff and equipment distributors who service laboratory microscope illuminators and ophthalmic examination instruments, and is fitted wherever the original lamp has reached the end of its working life.\u003c\/p\u003e\u003cp\u003eInstallation follows the equipment manufacturer's lamp-change procedure: isolate the power, wait for the housing to cool, withdraw the spent bulb and seat the new one fully in its holder. Keep the envelope free of fingerprints and check any alignment or focus adjustment the lamp housing provides, so that the beam is centred and even.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRated 6 V, 20 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eSuitable for microscope illuminators and ophthalmic instruments\u003c\/li\u003e\n\u003cli\u003eTwo-pin base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003ePractical stock spare for planned maintenance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51189833433255,"sku":"EHM-0272","price":1.89,"currency_code":"OMR","in_stock":false}]},{"product_id":"bulb-with-a-copper-base-12-30","title":"Bulb With A Copper Base 12-30","description":"\u003cp\u003eThis halogen bulb is rated at 12 V and 30 W and fits lamp housings that accept a copper contact base. It is a service spare for slit lamps, microscopes and instrument illuminators in hospitals, clinics and laboratories, and is typically stocked by maintenance teams so lighting can be restored without delay.\u003c\/p\u003e\u003cp\u003eTo replace, isolate the unit, let the lamp housing cool and remove the spent bulb. Seat the new bulb fully so that both contacts engage, handling it only by its base or with clean gloves. Using the specified 12 V, 30 W rating protects the transformer and gives the even, bright field the instrument was designed around.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRated 12 V, 30 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eCopper contact base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003eRestores full brightness and colour rendering\u003c\/li\u003e\n\u003cli\u003ePractical stock spare for planned maintenance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51189833466023,"sku":"EHM-0273","price":16.79,"currency_code":"OMR","in_stock":false}]},{"product_id":"german-circular-fork-bulb-base","title":"German Circular Fork Bulb Base","description":"\u003cp\u003eThe Circular Two-Pin Lamp Holder is a round replacement socket for two-pin (bi-pin) halogen bulbs used in medical examination lamps, surgical lights and instrument illuminators. It is intended for biomedical engineers and clinic maintenance staff who need to renew a holder whose contacts have loosened, scorched or failed after repeated bulb changes.\u003c\/p\u003e\u003cp\u003eWith the equipment isolated from the mains, the old holder is removed from the lamp head, the new holder is connected to the supply leads and secured in position, and the bulb is then pressed into its contacts. A sound holder gives firm, low-resistance contact with the bulb pins, preventing flicker and overheating and extending the life of each bulb fitted to it.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRound socket for two-pin halogen bulbs\u003c\/li\u003e\n\u003cli\u003eRestores firm contact and prevents flicker\u003c\/li\u003e\n\u003cli\u003eHeat-resistant body for lamp-head service\u003c\/li\u003e\n\u003cli\u003eSpare part for examination and surgical lights\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51189943468199,"sku":"EHM-0482","price":5.83,"currency_code":"OMR","in_stock":false}]},{"product_id":"head-light-omega","title":"Head Light Omega","description":"\u003cp\u003eThe Omega Head Light is a head-mounted examination lamp that delivers a focused beam in line with the clinician's gaze while leaving both hands free. It is used in ENT and dental practices, dermatology, minor surgery, veterinary and general examination rooms across hospitals and clinics.\u003c\/p\u003e\u003cp\u003eThe clinician fits the headband, angles the lamp so the spot lands on the examination field and adjusts brightness as required. Because the light follows the head, cavities, wounds and deep anatomical sites stay illuminated as the clinician moves, improving visualisation without relying on an assistant. The lamp is switched off and the headband wiped clean between patients.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHands-free head-mounted examination lighting\u003c\/li\u003e\n\u003cli\u003eBeam follows the clinician's line of sight\u003c\/li\u003e\n\u003cli\u003eAdjustable headband and lamp angle\u003c\/li\u003e\n\u003cli\u003eSuited to ENT, dental and minor surgery\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51190081519783,"sku":"EHM-0574","price":47.3,"currency_code":"OMR","in_stock":false}]},{"product_id":"lamp-12-volt-30-watt-osram","title":"Lamp 12 Volt 30 Watt Osram","description":"\u003cp\u003eA 12 V, 30 W halogen bulb with a standard low-voltage base, supplied as a replacement lamp for slit lamps, microscopes and bench-top instrument illuminators. It is intended for hospital engineering departments, clinic maintenance staff and equipment distributors who need a direct spare that restores the instrument's original light output.\u003c\/p\u003e\u003cp\u003eThe bulb is fitted by pressing its contacts squarely into the lamp holder once the equipment is isolated and cool. Handle it by the base or with a clean cloth, as fingerprints on the quartz glass cause hot spots and early failure. Replacing with the correct 12 V, 30 W rating preserves the lamp's intended brightness and colour rendering.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuitable for slit lamps, microscopes and instrument illuminators\u003c\/li\u003e\n\u003cli\u003eRated 12 V, 30 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eStandard low-voltage base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003eFit with clean gloves to protect the envelope\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51190117630119,"sku":"EHM-0640","price":12.51,"currency_code":"OMR","in_stock":false}]},{"product_id":"led-head-light","title":"Led Head Light","description":"\u003cp\u003eThe LED Head Light is a compact head-worn lamp that gives a bright, focused white beam in line with the wearer's line of sight, leaving both hands free. It is used for examinations and minor procedures in clinics, ENT and dental rooms, home visits and first-aid settings, and as a general task light in treatment areas.\u003c\/p\u003e\u003cp\u003eThe elastic headband is adjusted to fit, the lamp is tilted so the spot falls on the area being examined and the LED is switched on at the unit. LED illumination runs cool and uses little power, so the lamp is comfortable for extended wear and the light does not heat the examination field. The headband and housing are wiped clean between uses.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHands-free LED illumination for examinations\u003c\/li\u003e\n\u003cli\u003eAdjustable elastic headband and tilt angle\u003c\/li\u003e\n\u003cli\u003eCool-running LED comfortable for extended wear\u003c\/li\u003e\n\u003cli\u003eSuitable for clinic, home-visit and first-aid use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51190124937383,"sku":"EHM-0650","price":5.14,"currency_code":"OMR","in_stock":false}]},{"product_id":"light-bulb-philips-cup-12-wit-100-watt","title":"Light Bulb Philips Cup 12 Wit 100 Watt","description":"\u003cp\u003eThe Philips Reflector Halogen Bulb 12 V 100 W is a replacement lamp for fibre-optic light sources, microscope illuminators and projection optics, rated 12 V and 100 W and fitted with an integral reflector and two-pin base. It is used by theatre technicians and biomedical engineers in hospitals and diagnostic centres whenever the installed bulb dims, flickers or fails.\u003c\/p\u003e\u003cp\u003eInstallation follows the equipment manufacturer's lamp-change procedure: isolate the power, wait for the housing to cool, withdraw the spent bulb and seat the new one fully in its holder. Keep the envelope free of fingerprints and check any alignment or focus adjustment the lamp housing provides, so that the beam is centred and even.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo-pin base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003eRated 12 V, 100 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eSuitable for fibre-optic light sources and microscope illuminators\u003c\/li\u003e\n\u003cli\u003eIntegral reflector gives a focused, forward-directed beam\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Philips","offers":[{"title":"Default Title","offer_id":51190128378023,"sku":"EHM-0653","price":9.94,"currency_code":"OMR","in_stock":false}]},{"product_id":"medical-lamp-6-volt-20-watt-osram","title":"Medical Lamp 6 Volt 20 Watt Osram","description":"\u003cp\u003eThis Osram halogen bulb is rated at 6 V and 20 W and fits lamp housings that accept a two-pin (bi-pin) base. It is a service spare for laboratory microscope illuminators and ophthalmic examination instruments in hospitals, clinics and laboratories, and is typically stocked by maintenance teams so lighting can be restored without delay.\u003c\/p\u003e\u003cp\u003eBefore fitting, switch the equipment off, disconnect it from the mains and allow the old bulb to cool completely. The new bulb is pushed firmly into the holder without touching the quartz envelope with bare fingers, since skin oils shorten lamp life. Always match the voltage, wattage and base of the original lamp.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRated 6 V, 20 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eTwo-pin base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003eRestores full brightness and colour rendering\u003c\/li\u003e\n\u003cli\u003ePractical stock spare for planned maintenance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51190157836455,"sku":"EHM-0694","price":12.51,"currency_code":"OMR","in_stock":false}]},{"product_id":"medical-lamp-6volt-10watt","title":"Medical Lamp 6volt 10watt","description":"\u003cp\u003eThe Halogen Bulb 6 V 10 W is a low-voltage halogen lamp rated 6 V and 10 W, with a two-pin (bi-pin) base. It is supplied as a like-for-like replacement for compact microscope illuminators and small ophthalmic and ENT instruments, and is intended for biomedical technicians and facility managers who keep examination, theatre and laboratory lighting in service.\u003c\/p\u003e\u003cp\u003eThe bulb is fitted by pressing its contacts squarely into the lamp holder once the equipment is isolated and cool. Handle it by the base or with a clean cloth, as fingerprints on the quartz glass cause hot spots and early failure. Replacing with the correct 6 V, 10 W rating preserves the lamp's intended brightness and colour rendering.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRated 6 V, 10 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eTwo-pin base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003eSuitable for compact microscopes and small examination instruments\u003c\/li\u003e\n\u003cli\u003eRestores full brightness and colour rendering\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51190159016103,"sku":"EHM-0695","price":1.89,"currency_code":"OMR","in_stock":false}]},{"product_id":"medical-lamp-osram-12volt-100watt","title":"Medical Lamp Osram 12volt 100watt","description":"\u003cp\u003eA 12 V, 100 W halogen bulb with a two-pin (bi-pin) base, supplied as a replacement lamp for laboratory microscopes, surgical headlights and fibre-optic light sources. It is intended for hospital engineering departments, clinic maintenance staff and equipment distributors who need a direct spare that restores the instrument's original light output.\u003c\/p\u003e\u003cp\u003eInstallation follows the equipment manufacturer's lamp-change procedure: isolate the power, wait for the housing to cool, withdraw the spent bulb and seat the new one fully in its holder. Keep the envelope free of fingerprints and check any alignment or focus adjustment the lamp housing provides, so that the beam is centred and even.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuitable for microscopes, headlights and fibre-optic sources\u003c\/li\u003e\n\u003cli\u003eRated 12 V, 100 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eTwo-pin base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003eFit with clean gloves to protect the envelope\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51190159933607,"sku":"EHM-0696","price":1.89,"currency_code":"OMR","in_stock":false}]},{"product_id":"medical-lamp-rectangular-ceramic-holder","title":"Medical Lamp Rectangular Ceramic Holder","description":"\u003cp\u003eThe Rectangular Ceramic Lamp Holder is a replacement socket for the halogen bulbs used in medical examination lamps, surgical lights, microscopes and other instrument illuminators. It is intended for biomedical engineers, hospital engineering departments and clinic maintenance staff who service lamp heads in which the original holder has cracked, scorched or lost contact tension.\u003c\/p\u003e\u003cp\u003eWith the equipment isolated from the mains, the worn holder is unwired and removed, the new ceramic holder is connected to the supply leads and fixed in the lamp head, and the bulb is then pressed into its contacts. The ceramic body resists the sustained heat of a halogen bulb, and fresh contacts give a stable connection that prevents flicker and premature bulb failure.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRectangular ceramic socket for halogen lamp heads\u003c\/li\u003e\n\u003cli\u003eResists sustained heat from high-output bulbs\u003c\/li\u003e\n\u003cli\u003eFresh contacts prevent flicker and early bulb failure\u003c\/li\u003e\n\u003cli\u003eSpare part for examination, surgical and instrument lights\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51190160687271,"sku":"EHM-0697","price":5.83,"currency_code":"OMR","in_stock":false}]},{"product_id":"omega-torch-pen","title":"Omega Torch Pen","description":"\u003cp\u003eThe Omega diagnostic penlight is a pocket-sized examination torch for checking pupil response, inspecting the throat, mouth and skin, and giving a focused beam during routine assessment. It is made for doctors, nurses, paramedics and students in clinics, wards, ambulances and on home visits.\u003c\/p\u003e\u003cp\u003eThe light is switched on, directed at the area being examined and switched off after use to preserve the battery. Its slim body clips to a pocket or lanyard so it is always to hand, and the focused beam is bright enough for pupil assessment without dazzling the patient. Batteries are replaced by unscrewing the barrel, keeping the torch in service for years of daily use.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSlim pocket body with clip\u003c\/li\u003e\n\u003cli\u003eFocused beam for pupil and throat examination\u003c\/li\u003e\n\u003cli\u003eBattery operated for use anywhere\u003c\/li\u003e\n\u003cli\u003eSimple on-off switch operation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51190220193959,"sku":"EHM-0785","price":1.54,"currency_code":"OMR","in_stock":false}]},{"product_id":"osram-cup-bulb-15-volt-150-watt","title":"Osram Cup Bulb 15 Volt 150 Watt","description":"\u003cp\u003eThe Osram Reflector Halogen Bulb 15 V 150 W is a replacement lamp for endoscopy and microscopy light sources, rated 15 V and 150 W and fitted with an integral reflector and two-pin base. It is used by theatre technicians and biomedical engineers in hospitals and diagnostic centres whenever the installed bulb dims, flickers or fails.\u003c\/p\u003e\u003cp\u003eTo replace, isolate the unit, let the lamp housing cool and remove the spent bulb. Seat the new bulb fully so that both contacts engage, handling it only by its base or with clean gloves. Using the specified 15 V, 150 W rating protects the transformer and gives the even, bright field the instrument was designed around.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo-pin base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003eRated 15 V, 150 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eSuitable for endoscopy and microscopy light sources\u003c\/li\u003e\n\u003cli\u003eIntegral reflector gives a focused, forward-directed beam\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51190228877479,"sku":"EHM-0797","price":4.76,"currency_code":"OMR","in_stock":false}]},{"product_id":"osram-german-cup-bulb-12-volt-100-watt","title":"Osram German Cup Bulb 12 Volt 100 Watt","description":"\u003cp\u003eThe Osram Reflector Halogen Bulb 12 V 100 W is a 12 V, 100 W replacement halogen bulb with an integral reflector and two-pin base. It is intended for biomedical engineers, clinic maintenance staff and equipment distributors who service fibre-optic light sources, microscope illuminators and projection optics, and is fitted wherever the original lamp has reached the end of its working life.\u003c\/p\u003e\u003cp\u003eBefore fitting, switch the equipment off, disconnect it from the mains and allow the old bulb to cool completely. The new bulb is pushed firmly into the holder without touching the quartz envelope with bare fingers, since skin oils shorten lamp life. Always match the voltage, wattage and base of the original lamp.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRated 12 V, 100 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eSuitable for fibre-optic light sources and microscope illuminators\u003c\/li\u003e\n\u003cli\u003eTwo-pin base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003eIntegral reflector gives a focused, forward-directed beam\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51190229958823,"sku":"EHM-0798","price":4.76,"currency_code":"OMR","in_stock":false}]},{"product_id":"osram-halogen-lampe-22-8v-50w","title":"Osram Halogen Lampe 22,8v 50w","description":"\u003cp\u003eThis Osram halogen bulb is rated at 22.8 V and 50 W and fits lamp housings that accept a two-pin (bi-pin) base. It is a service spare for operating-theatre lights, satellite lamp heads and minor-surgery lights in hospitals, clinics and laboratories, and is typically stocked by maintenance teams so lighting can be restored without delay.\u003c\/p\u003e\u003cp\u003eThe bulb is fitted by pressing its contacts squarely into the lamp holder once the equipment is isolated and cool. Handle it by the base or with a clean cloth, as fingerprints on the quartz glass cause hot spots and early failure. Replacing with the correct 22.8 V, 50 W rating preserves the lamp's intended brightness and colour rendering.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRated 22.8 V, 50 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eTwo-pin base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003eRestores full brightness and colour rendering\u003c\/li\u003e\n\u003cli\u003ePractical stock spare for planned maintenance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51190231924903,"sku":"EHM-0800","price":6.51,"currency_code":"OMR","in_stock":false}]},{"product_id":"osram-lampe-12volt-50watt","title":"Osram Lampe 12Volt 50Watt","description":"\u003cp\u003eThe Osram Halogen Bulb 12 V 50 W is a low-voltage halogen lamp rated 12 V and 50 W, with a standard low-voltage base. It is supplied as a like-for-like replacement for examination lamps, dental unit lights, microscopes and fibre-optic light sources, and is intended for biomedical technicians and facility managers who keep examination, theatre and laboratory lighting in service.\u003c\/p\u003e\u003cp\u003eInstallation follows the equipment manufacturer's lamp-change procedure: isolate the power, wait for the housing to cool, withdraw the spent bulb and seat the new one fully in its holder. Keep the envelope free of fingerprints and check any alignment or focus adjustment the lamp housing provides, so that the beam is centred and even.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRated 12 V, 50 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eStandard low-voltage base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003eSuitable for examination lamps, dental lights and microscopes\u003c\/li\u003e\n\u003cli\u003eRestores full brightness and colour rendering\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51190233464999,"sku":"EHM-0801","price":5.66,"currency_code":"OMR","in_stock":false}]},{"product_id":"osram-medical-lamp-24volt-150watt","title":"Osram Medical Lamp 24volt 150watt","description":"\u003cp\u003eA 24 V, 150 W halogen bulb with a two-pin (bi-pin) base, supplied as a replacement lamp for operating-theatre lights, surgical microscopes and projection optics. It is intended for hospital engineering departments, clinic maintenance staff and equipment distributors who need a direct spare that restores the instrument's original light output.\u003c\/p\u003e\u003cp\u003eTo replace, isolate the unit, let the lamp housing cool and remove the spent bulb. Seat the new bulb fully so that both contacts engage, handling it only by its base or with clean gloves. Using the specified 24 V, 150 W rating protects the transformer and gives the even, bright field the instrument was designed around.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuitable for theatre lights and surgical microscopes\u003c\/li\u003e\n\u003cli\u003eRated 24 V, 150 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eTwo-pin base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003eFit with clean gloves to protect the envelope\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51190234251431,"sku":"EHM-0802","price":1.89,"currency_code":"OMR","in_stock":false}]},{"product_id":"philips-medical-lamp-6volt-20watt","title":"Philips Medical Lamp 6volt 20watt","description":"\u003cp\u003eThe Philips Halogen Bulb 6 V 20 W is a low-voltage halogen lamp rated 6 V and 20 W, with a two-pin (bi-pin) base. It is supplied as a like-for-like replacement for laboratory microscope illuminators and ophthalmic examination instruments, and is intended for biomedical technicians and facility managers who keep examination, theatre and laboratory lighting in service.\u003c\/p\u003e\u003cp\u003eTo replace, isolate the unit, let the lamp housing cool and remove the spent bulb. Seat the new bulb fully so that both contacts engage, handling it only by its base or with clean gloves. Using the specified 6 V, 20 W rating protects the transformer and gives the even, bright field the instrument was designed around.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRated 6 V, 20 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eTwo-pin base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003eSuitable for microscope illuminators and ophthalmic instruments\u003c\/li\u003e\n\u003cli\u003eRestores full brightness and colour rendering\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Philips","offers":[{"title":"Default Title","offer_id":51190258991271,"sku":"EHM-0848","price":10.21,"currency_code":"OMR","in_stock":false}]},{"product_id":"philips-medical-lampe-22-8v-50w","title":"Philips Medical Lampe 22,8v 50w","description":"\u003cp\u003eA 22.8 V, 50 W halogen bulb with a two-pin (bi-pin) base, supplied as a replacement lamp for operating-theatre lights, satellite lamp heads and minor-surgery lights. It is intended for hospital engineering departments, clinic maintenance staff and equipment distributors who need a direct spare that restores the instrument's original light output.\u003c\/p\u003e\u003cp\u003eFitting takes a few minutes: isolate the equipment, allow it to cool, release the old bulb and press the replacement home until it sits square in its holder. Avoid touching the glass, and wipe it with alcohol if handled. Keeping a spare of the correct rating on site avoids interrupted clinics and theatre lists.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuitable for theatre lights and minor-surgery lights\u003c\/li\u003e\n\u003cli\u003eRated 22.8 V, 50 W to match the original lamp\u003c\/li\u003e\n\u003cli\u003eTwo-pin base for a secure, direct fit\u003c\/li\u003e\n\u003cli\u003eFit with clean gloves to protect the envelope\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Philips","offers":[{"title":"Default Title","offer_id":51190259450023,"sku":"EHM-0849","price":13.64,"currency_code":"OMR","in_stock":false}]},{"product_id":"resonant-fork","title":"Resonant Fork","description":"\u003cp\u003eThe medical tuning fork is a diagnostic instrument for testing hearing and vibration sense. It is intended for ENT specialists, neurologists, general practitioners, audiologists and physiotherapists in clinics, hospitals and teaching institutions, and forms part of the standard neurological and ear examination kit.\u003c\/p\u003e\u003cp\u003eThe fork is struck gently against the heel of the hand or a padded surface to set it vibrating. For hearing tests the stem is placed on the mastoid or forehead and the tines held near the ear to compare bone and air conduction; for neurological assessment the vibrating stem is applied to bony prominences to test sensation. The frequency marked on the fork is confirmed on quotation.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor Rinne and Weber hearing tests\u003c\/li\u003e\n\u003cli\u003eVibration sense testing in neurology\u003c\/li\u003e\n\u003cli\u003eDurable metal construction for repeated use\u003c\/li\u003e\n\u003cli\u003eCompact and easy to clean\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51190281306279,"sku":"EHM-0917","price":1.2,"currency_code":"OMR","in_stock":false}]},{"product_id":"riester-diagnostic-penlight","title":"RIESTER DIAGNOSTIC PENLIGHT","description":"\u003cp\u003eThe Riester diagnostic penlight is a professional pocket torch for assessing pupil reaction and illuminating the mouth, throat, nose and skin during examination. It is intended for physicians, nurses, paramedics and medical students in hospitals, clinics, emergency services and community care.\u003c\/p\u003e\u003cp\u003eThe clinician switches the light on, directs the beam across the eye to observe pupil constriction, or into the oral cavity together with a tongue depressor, then switches it off to conserve the battery. The slim metal body clips securely into a coat pocket and the focused beam gives even illumination without excessive glare. Batteries are replaced by unscrewing the barrel.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFocused beam for pupil and throat examination\u003c\/li\u003e\n\u003cli\u003eSlim body with secure pocket clip\u003c\/li\u003e\n\u003cli\u003eBattery operated and easy to service\u003c\/li\u003e\n\u003cli\u003eMade by Riester for professional diagnostic use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Riester","offers":[{"title":"Default Title","offer_id":51190281404583,"sku":"EHM-0920","price":4.08,"currency_code":"OMR","in_stock":false}]},{"product_id":"slate-lamp-6-volt-4-5-ampere","title":"Slate Lamp 6 Volt 4.5 Ampere","description":"\u003cp\u003eThe Slit Lamp Bulb 6 V 4.5 A is a replacement illumination bulb for ophthalmic slit lamps that specify a 6 V, 4.5 A lamp. It is intended for ophthalmologists, optometrists and biomedical engineers in eye clinics, hospital ophthalmology departments and optical practices who need to maintain the brightness and even illumination of their slit lamp.\u003c\/p\u003e\u003cp\u003eWith the slit lamp switched off and cool, the lamp housing is opened, the old bulb released and the new one fitted so that the filament sits correctly in the optical path; the housing is then closed and the slit image checked for even brightness. Avoid touching the glass, and keep a spare in the clinic so examinations are not interrupted.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRated 6 V, 4.5 A for slit lamp illumination\u003c\/li\u003e\n\u003cli\u003eRestores bright, even slit illumination\u003c\/li\u003e\n\u003cli\u003eSpare for eye clinics and optical practices\u003c\/li\u003e\n\u003cli\u003eFit with the lamp isolated and cool\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51190290219175,"sku":"EHM-0968","price":10.62,"currency_code":"OMR","in_stock":false}]},{"product_id":"spirit-pen-light-taiwan","title":"Spirit Pen Light Taiwan","description":"\u003cp\u003eThe Spirit diagnostic penlight is a compact examination torch for pupil assessment and for illuminating the throat, mouth, nose, ears and skin. It is intended for doctors, nurses, paramedics and students in hospitals, clinics, ambulances and on home-care visits.\u003c\/p\u003e\u003cp\u003eThe clinician activates the light, sweeps the beam across the eye to check pupil response or directs it into the mouth or ear during inspection, then switches off to save the battery. The pen clips into a pocket and is light enough to carry throughout a shift without being noticed. Batteries are replaced by unscrewing the body, so the torch remains in service for a long time with minimal upkeep.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompact penlight for routine examination\u003c\/li\u003e\n\u003cli\u003eFocused beam for pupil assessment\u003c\/li\u003e\n\u003cli\u003ePocket clip keeps it to hand\u003c\/li\u003e\n\u003cli\u003eBattery operated with replaceable cells\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51190291071143,"sku":"EHM-0980","price":2.91,"currency_code":"OMR","in_stock":false}]},{"product_id":"surgical-lamp-24v-25w","title":"Surgical Lamp 24V 25W","description":"\u003cp\u003eThe Surgical Light Bulb 24 V 25 W is a low-wattage replacement bulb for minor-surgery lights, examination lamps and procedure lights that run from a 24 V supply. It is intended for clinic maintenance staff, biomedical engineers and theatre technicians in hospitals, outpatient departments, dental surgeries and general practices.\u003c\/p\u003e\u003cp\u003eThe lamp is switched off and allowed to cool, the spent bulb is withdrawn and the replacement seated firmly in its holder, matching the base of the original. Handling the bulb by its base keeps the glass clean and preserves its life. Fitting the specified 24 V, 25 W rating keeps the light output and heat within the design limits of the lamp head.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRated 24 V, 25 W for minor-surgery and examination lights\u003c\/li\u003e\n\u003cli\u003eDirect replacement that keeps output within lamp design limits\u003c\/li\u003e\n\u003cli\u003eHandle by the base to protect the glass\u003c\/li\u003e\n\u003cli\u003eCompact spare for clinic maintenance stock\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51190298607783,"sku":"EHM-1003","price":0.69,"currency_code":"OMR","in_stock":false}]},{"product_id":"sylvania-bulb-120-volts-100-watts","title":"Sylvania Bulb 120 Volts 100 Watts","description":"\u003cp\u003eThe Sylvania Bulb 120 V 100 W is a mains-voltage replacement bulb for examination lamps, magnifier lights and instrument illuminators designed for a 120 V supply. It is intended for clinic maintenance staff and biomedical engineers who service equipment built to this voltage.\u003c\/p\u003e\u003cp\u003eThe bulb is fitted with the lamp switched off and unplugged, matching the base and shape of the original. Because it is rated for 120 V, it must only be used on a 120 V supply or through a suitable step-down transformer; connecting it directly to a 220 to 240 V mains supply will cause immediate failure.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRated 120 V, 100 W for lamps built to this voltage\u003c\/li\u003e\n\u003cli\u003eReplacement for examination and magnifier lights\u003c\/li\u003e\n\u003cli\u003eUse only on 120 V or via a step-down transformer\u003c\/li\u003e\n\u003cli\u003eHandle by the base once cool\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51190298837159,"sku":"EHM-1007","price":3.36,"currency_code":"OMR","in_stock":false}]},{"product_id":"tyler-s-nerve-hammer","title":"Tyler’s Nerve Hammer.","description":"\u003cp\u003eThe Taylor reflex hammer is the classic triangular-headed percussion hammer for testing deep tendon reflexes at the knee, ankle, biceps and triceps. It is intended for physicians, neurologists, physiotherapists, nurses and students in clinics, hospital wards and teaching settings.\u003c\/p\u003e\u003cp\u003eThe clinician holds the handle near its end and swings the hammer so that the broad edge or the point of the rubber head strikes the tendon, observing the resulting muscle contraction. The soft rubber head is comfortable for the patient, and the flat metal handle is easily wiped clean between examinations. Its light weight and compact size allow it to be carried in a coat pocket throughout the working day.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTriangular rubber head for tendon percussion\u003c\/li\u003e\n\u003cli\u003eFlat metal handle, easy to clean\u003c\/li\u003e\n\u003cli\u003eLightweight instrument for the coat pocket\u003c\/li\u003e\n\u003cli\u003eStandard tool for neurological examination\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MedyMar","offers":[{"title":"Default Title","offer_id":51190311583911,"sku":"EHM-1050","price":0.96,"currency_code":"OMR","in_stock":false}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/3707\/7671\/collections\/surgical-instruments-category-banner.png?v=1793186635","url":"https:\/\/medymar.com\/collections\/surgical-instruments.oembed","provider":"MedyMar","version":"1.0","type":"link"}